Table 84: Wbm "Stp" Page - "General Settings" Tab - WAGO 852-1305 Manual

200 Configuring in the Web-Based Management System (WBM)
Table 84: WBM "STP" Page – "General Settings" Tab
Spanning Tree Protocol Settings
Parameters
State
Mode
Bridge Parameters
Parameters
Forward Delay
Max Age
Hello Time
Priority
Pathcost Method
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Default Description
Disable Select "Disable" in the selection box to disable this
function.
Enable Select "Enable" in the selection box to use the
"Spanning Tree Protocol" (STP) or "Rapid Spanning
Tree Protocol" (RSTP).
RSTP Select "RSTP" in the selection box if you want to
use the faster "Rapid Spanning Tree Protocol".
MSTP Select "MSTP" in the selection box if you want to
use the "Multiple Spanning Tree Protocol".
STP Select "STP" in the selection box if you want to use
the "Spanning Tree Protocol".
Default Description
15 Enter the "Forward Delay" time in the input field.
Valid range: 4 ... 30 s
20 Enter the "Max Age" time in the input field.
Valid range: 6 ... 40 s
2 Enter the "Hello Time" in the input field.
Valid range: 1 ... 10 s
32768 Enter a value for the priority in the input field.
The lower the numerical value you assign, the higher
the priority of this bridge.
Valid range: 0 ... 61440
Short Select "Short" in the selection box if you want to
select a size of 16 bits and a transmission rate of up
to 10 Gbit.
10 MBit
100 MBit = 19
1 GBit
10 GBit
Long Select "Long" in the selection box if you want to
select a size of 32 bits and a transmission rate of up
to 10 TBit.
10 MBit = 2000000
100MBit = 200000
1 GBit
10 GBit = 2000
100 GBit = 200
1 TBit
WAGO-ETHERNET-Zubehör 852
= 100
= 4
= 2
= 20000
= 20
Manual
1.1.0