WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Table 98: WBM "Port Security" Page
Port Security Settings
Parameters
Port Security
Port
State
Maximum MAC
(1~30)
Port Security Status
Parameters
Port
State
Maximum MAC
Pos : 28.8.6 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
1.1.0
Configuring in the Web-Based Management System (WBM)
Default
Disable
Enable
From:
1
To:
1
Disable
Enable
5
Default
1 ... 10
Enable
Disable
0 ... 30
Description
Select "Disable" in the selection box to disable port
security on the switch.
Select "Enable" in the selection box to enable port
security on the switch.
Select a port or port range in the selection box to
configure the "Port Security".
Select a port or port range in the selection box to
configure the "Port Security".
Select "Disable" in the selection box to disable port
security for a port or port range.
Select "Enable" in the selection box to enable port
security for a port or port range.
Enter the maximum number of MAC addresses per
interface in the input field.
Description
This column displays the port numbers.
This column displays if port security is enabled or
disabled.
This column displays the maximum number of MAC
addresses.
229