Table 30: Wbm "System Information" Page; Parameters Description - WAGO 852-1305 Manual

WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX

Table 30: WBM "System Information" Page

Parameters
Model Name
Host Name
Boot Code Version
Firmware Version
Built Date
DHCP Client
IP Address
Subnet mask
Default Gateway
MAC Address
Serial Number
Management VLAN
CPU Loading
Memory Informationen
Current Time
DHCPv6 Client
IPv6 Link Local
IPv6 Default Gateway
IPv6 Global
Refresh
Pos : 28.8.3 /Serie 852 (ETH ERNET-Z ubehör)/Konfigurieren/Grundei nstellungen 852-0303 @ 27\mod_1467718192784_21.doc x @ 216172 @ 234444344443344 @ 1
Manual
1.1.0
Configuring in the Web-Based Management System (WBM)
Description
This display field shows the model name of the switch.
This display field shows the host name of the switch.
This display field shows the boot code version.
This display field shows the version number of the firmware
currently installed.
This display field shows the create date of the firmware currently
installed.
This display field shows if the DHCP client function is enabled.
This display field shows the IP address of the switch.
This display field shows the subnet mask of the switch.
This display field shows the default gateway of the switch.
This display field shows the MAC (Media Access Control) address
of the switch.
This display field shows the serial number.
This display field shows the VLAN ID required for the switch
management process.
This display field shows the percentage system load of the switch.
This display field shows the switch's total memory, available
memory ("Free") and used memory ("Used").
This display field shows the current date (yyyy-mm-dd) and current
time (hh:mm:ss).
This display field shows if the DHCPv6 client is ON or OFF.
This display field shows the IPv6 Link-local address.
This display field shows if the global IPv6 Link address has also
been entered.
This display field shows if the global IPv6 Link address.
Click this button to update the information on this page.
119