Port Security - WAGO 852-1305 Manual

WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Quiet Period
•
The "Quiet Period" function is used to specify the time a client has to wait
before the next authentication attempt. This prevents the switch from
becoming overloaded with continuous authentication attempts from the
client. The acceptable range for this field is 0 to 65535 seconds.
• Server-Timeout
The "Server-Timeout" value is used for timing out the authentication server.
• Supp-Timeout
The "Supp-Timeout" value is the initialization value used for timing out a
supplicant.
• Max-req Time
The "Max-req Time" specifies how often the switch attempts to connect to
the authentication server before determining the server is down. The
acceptable range for this field is 1 to 10 attempts.
7.3.4

Port Security

The switch receives the MAC address of a device that is connected to a specific
port direction and allows data forwarding. The functions of the switch allow
control over which and how many devices may be connected to a switch port.
The "Port Security" functions can specify the maximum number of MAC
addresses per interface. If the number is exceeded, incoming packets with new
MAC addresses are dropped. A MAC address table can be used to check that
number. The static MAC addresses are included for the limit.
State Change of a Port on the Switch
If the state of a port on the switch is changed from disabled to enabled, all MAC
addresses captured by this port are dropped.
Manual
1.1.0
Enhanced Features 105