WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
10.3.2
Default Settings
10.3.2.1
System
Table 115: CLI "System" Configuration
Node
configure
configure
configure
eth0
eth0
eth0
eth0
10.3.2.2
Jumbo Frame
Table 116: CLI "Jumbo Frame" Configuration
Node
enable
configure
Manual
1.1.0
Command
reboot
hostname STRINGS
interface eth0
ip address A.B.C.D/M
ip address default-gateway
A.B.C.D
ip dhcp client
(disable|enable|renew)
management vlan
VLAN_ID
Command
show jumboframe
jumboframe
(10240|1522|1536|1552|92
16)
Description
This command reboots the system.
This command sets the system's network name.
This command enters the eth0 interface node to
configure the system IP.
This command configures a static IP and subnet
mask for the system.
This command configures the system default
gateway.
This command configures a DHCP client function
for the system.
Disable: Use a static IP address for the switch.
Enable & Renew: Use the DHCP client to get an IP
address from the DHCP server.
This command configures the management VLAN.
Description
This command displays the current jumbo frame
settings.
This command configures the maximum number of
bytes of frame size.
Appendix
261