WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
10.3.3.12 Dual Homing
Table 134: CLI "Dual Homing" Configuration
Node
enable
configure
configure
configure
configure
configure
Example
L2SWITCH(config)# link-aggregation 1 ports 5-6
L2SWITCH(config)# link-aggregation 1 enable
L2SWITCH(config)# dual-homing primary-channel port 2
L2SWITCH(config)# dual-homing secondary -channel trunk 1
L2SWITCH(config)# dual-homing enable
10.3.3.13 Link Aggregation
Table 135: CLI "Link Aggregation" Configuration
Node
enable
configure
configure
configure
Manual
1.1.0
Command
show dual-homing
dual-homing (disable |
enable)
no dual-homing primary-
channel
no dual-homing primary-
channel
dual-homing secondary-
channel (port | trunk)
VALUE
no dual-homing
secondary-channel
Command
show link-aggregation
link-aggregation
[GROUP_ID] (disable |
enable)
link-aggregation
[GROUP_ID] interface
PORTLISTS
no link-aggregation
[GROUP_ID] interface
PORTLISTS
Description
This command displays the "Dual Homing"
information.
This command disables / enables the "Dual Homing"
function in the system.
This command deletes the primary channel for "Dual
Homing" from the system.
This command deletes the primary channel for "Dual
Homing" from the system.
This command configures the secondary channel for
"Dual Homing" in the system. The channel can be a
single port or a "Trunk Group".
This command deletes the secondary channel for
"Dual Homing" from the system.
Description
The command displays the current configuration for
"Trunking".
The command disables / enables "Trunking" for the
specific "Trunk Group".
The command adds ports to a specific "Trunk
Group".
The command deletes ports from a specific "Trunk
Group".
Appendix
275