268
Appendix
10.3.3.5
IGMP Snooping
Table 126: CLI "IGMP Snooping" Configuration
Node
enable
configure
configure
configure
configure
configure
configure
configure
configure
interface
interface
interface
Example
L2SWITCH(config)#igmp-snooping enable
L2SWITCH(config)#igmp-snooping vlan 1
L2SWITCH(config)#igmp-snooping querier enable
L2SWITCH(config)#igmp-snooping querier vlan 1
L2SWITCH(config)#interface 1/0/1
L2SWITCH(config-if)#igmp-immediate-leave
L2SWITCH(config-if)# igmp-querier-mode fixed
Command
show igmp-snooping
igmp-snooping (disable |
enable)
igmp-snooping vlan
VLAN_ID
no igmp-snooping vlan
VLAN_ID
igmp-snooping querier
(disable | enable)
igmp-snooping querier
vlan VLAN_ID
no igmp-snooping querier
vlan VLAN_ID
igmp-snooping unknown-
multicast (drop|flooding)
igmp-snooping report-
suppression
(disable|enable)
igmp-querier-mode (auto |
fixed | edge)
igmp-immediate-leave
no igmp-immediate-leave The command disables the "Immediate Leave"
WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Description
This command displays the current "IGMP
Snooping" configurations.
This command disables / enables "IGMP Snooping"
on the switch.
This command enables "IGMP Snooping" on a
VLAN or VLAN range.
This command disables "IGMP Snooping" on a
VLAN or VLAN range.
This command disables / enables "IGMP Snooping
Querier" on the switch.
This command enables the "IGMP Snooping
Querier" function on a VLAN or VLAN range.
This command disables the "IGMP Snooping
Querier" function on a VLAN or VLAN range.
This command configures the process for unknown
multicast packets when the "IGMP Snooping"
function is enabled.
drop: All unknown multicast packets are dropped.
This command disables / enables the "IGMP
Snooping Report Suppression" function on the
switch.
This command specifies if and under what
conditions the port(s) are "IGMP Query Ports".
The switch forwards the "IGMP Join/Leave" packets
to an "IGMP Query Port", treating the port as if it
were connected to an IGMP multicast router (or
server). "IGMP Snooping" must also be enabled
(default: "Auto").
The command enables the "Immediate Leave"
function for "IGMP Snooping" for a specific
interface.
function for "IGMP Snooping" for a specific
interface.
Manual
1.1.0