Table 88: Wbm "Dhcp Snooping" Page - "Dhcp Snooping" Tab - WAGO 852-1305 Manual

WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Table 88: WBM "DHCP Snooping" Page – "DHCP Snooping" Tab
DHCP Snooping Settings
Parameters
State
VLAN State
DHCP Snooping Status
Parameters
DHCP Snooping Status
Enabled on VLAN
Manual
1.1.0
Configuring in the Web-Based Management System (WBM)
Default Description
Disable Select "Disable" in the selection box if you do not
want to use this function.
Enable Select "Enable" in the selection box to enable the
"DHCP Snooping".
You must then enable this function for specific
VLANs and configure "Trusted Ports".
Note
Add Select "Add" in the selection box and enter the
VLANs for which "DHCP Snooping" should be
enabled.
Valid range of VLAN IDs: 1 ... 4094.
Use a comma (,) or hyphen (-) to specify individual
VLANs or VLAN ranges.
Delete Select "Delete" in the selection box and enter the
VLANs for which "DHCP Snooping" should be
disabled.
Default Description
Disable This field displays if "DHCP Snooping" is enabled
Enable or disabled.
None This field displays the VLANs in which the "DHCP
1 ... 4094 Snooping" function is enabled.
"None" is displayed if no VLANs have been
specified.
Configuring DHCP requests
The switch drops all DHCP requests
when "DHCP Snooping" is enabled
and there are no "Trusted Ports".
Select "Disable" if you do not want to
use this function.
209