852-1322
The description of each parameter and its default value in Port Settings tab page are
summarized in Table "WBM "Configuration" Page – "Port Settings" Tab".
Parameters
Port n
10.4.6 Interface – Port Mirroring
10.4.6.1 General Information
Port-based mirroring is used on a network switch to send a copy of the network packets
sent or received by one or a range of ports to a network monitoring system connected to
another port (monitor port).
This is often used for network devices that require monitoring of network traffic, such as
an intrusion detection system (IDS).
Port mirroring, together with a network traffic analyzer, assists in monitoring network traf-
fic. Users can monitor the selected ports (source ports) for egress and ingress packets.
Source Mode
• Ingress: The incoming data packets are copied and forwarded to the monitor port.
Product manual | Version: 1.2.0
Industrial Managed Switch
Figure 29: WBM "Configuration" Page – "Port Settings" Tab
Table 20: WBM "Configuration" Page – "Port Settings" Tab"
Factory Default
Description
Enable
Port number on the industrial managed switch. The user can click
on the dropdown list to select either Enable or Disable to change
the status of the port. When enabling a port, data will be allowed
to transmit and receive through that particular port.
Configuration in the WBM
43