Table 128: Cli "Multicast Address" Configuration; Table 129: Cli "Port Isolation" Configuration; Multicast Address - WAGO 852-1305 Manual

270 Appendix
10.3.3.7

Multicast Address

Table 128: CLI "Multicast Address" Configuration

Node
enable
configure
configure
10.3.3.8 VLAN
10.3.3.8.1 Port Isolation

Table 129: CLI "Port Isolation" Configuration

Node
enable
interface
interface
Example
L2SWITCH(config)#interface 1/0/2
L2SWITCH(config-if)#port-isolation ports 3-10
Command
show mac-address-table
multicast
mac-address-table
multicast MACADDR
vlan VLAN_ID ports
PORTLIST
no mac-address-table
multicast MACADDR
Command
show port-isolation
port-isolation ports
PORTLISTS
no port-isolation
WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Description
This command displays the current static/dynamic
multicast address entries.
This command configures a static multicast entry.
This command deletes a static multicast entry from
the address table.
Description
This command displays the current "Port Isolation"
configurations.
"V" indicates that the port's packets can be sent to
that port.
"-" indicates that the port's packets cannot be sent to
that port.
This command configures a port or port range to
forward data packets from a specific port.
This command configures all ports to forward data
packets from a specific port.
Manual
1.1.0