Table 155: Cli "Auto Provision" Configuration; Table 156: Cli "Mail Alarm" Configuration; Auto Provision - WAGO 852-1305 Manual

8/4-port 100base-t/1000base-sx/lx industrial-managed-switch, 8 ports 100base-t,4 slots 1000base-sx/lx
Table of Contents

Advertisement

WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
10.3.6.2

Auto Provision

Table 155: CLI "Auto Provision" Configuration

Node
auto-provision
auto-provision
auto-provision
auto-provision
auto-provision
auto-provision
auto-provision
auto-provision
auto-provision
10.3.6.3
Mail Alarm

Table 156: CLI "Mail Alarm" Configuration

Node
enable
configure
configure
configure
configure
configure
configure
Manual
1.1.0
Command
show
active (enable | disable)
server-address IPADDR
protocol (tftp | http | ftp)
FTP-user username
STRING password
STRING
folder STRING
version <0-65535>
no folder
no FTP-user
Command
show mail-alarm
mail-alarm (disable |
enable)
mail-alarm mail-from
mail-alarm mail-to
mail-alarm server-ip
IPADDR server-port
VALUE
mail-alarm server-ip
IPADDR server-port
Default
mail-alarm trap-event
(reboot | link-change |
config. | firmware | login |
port-blocked)
(disable|enable)
Description
This command displays the current configurations
for the "Auto Provision".
This command enables / disables the "Auto
Provision" function.
This command sets the IP address of the server for
the "Auto Provision".
The command configures the update protocol.
The command configures the username and
password for the FTP server.
The command sets the folder for the "Auto
Provision" server.
The command configures the version for "Auto
Provision" on the switch.
The command resets the folder to the default setting.
The command resets the username and password to
default setting.
Description
This command displays the "Mail Alarm"
configurations.
This command disables / enables the "Mail Alarm"
function.
This command configures the e-mail sender.
This command configures the e-mail receiver.
This command configures IP address and TCP port
for the mail server.
This command configures the IP address of the mail
server and sets its TCP port to 25.
This command disables / enables mail trap events.
Appendix
291

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents