WAGO 852-1305 Manual page 224

224 Configuring in the Web-Based Management System (WBM)
Table 96: WBM "802.1x" Page – "Global Settings" Tab
Secondary
Radius
Server
Authentication Method
Global Status
Parameters
State
Authentication Method
Guest VLAN
Primary
Radius
Server
Secondary
Radius
Server
Local Authentic User
IP:
UDP Port: 0 ... 65535
Shared Key:
None
Delete
Add
Default
Disable
Enable
Local
Radius
IP:
UDP Port:
Shared Key:
IP:
UDP Port:
Shared Key:
admin,
WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
This is the back-up server that is only used if the
primary RADIUS server fails.
In the input field, enter the IP address of the external
RADIUS server in decimal-point notation.
Enter the port number of the RADIUS server in the
input field.
Enter a password (up to 32 alphanumeric characters)
in the input field to use as the common key for the
connection between the external RADIUS server and
the switch.
This key may not be sent over the network. The key
must be identical on the external RADIUS server
and the switch.
The user name and password are displayed, added or
deleted in these input fields.
If you selected "None" in the selection box, you then
cannot change the user name and password.
User Name: If you selected "Delete" in the
selection box, you can change the user
name.
Password: If you selected "Add" in the selection
box, you can change the user name and
password.
Description
This field indicates if 802.1x authentication is
enabled or disabled.
This field displays the authentication method.
This field displays the guest VLAN.
This field displays the IP address, UDP port and
common key for the primary RADIUS server.
The fields are empty if no configuration is executed.
This field displays the IP address, UDP port and
common key for the secondary RADIUS server.
The fields are empty if no configuration is executed.
This field displays the list of users logged in.
Manual
1.1.0