WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Example
L2SWITCH#configure terminal
L2SWITCH(config)#bandwidth-limit egress 1 ports 1-8
L2SWITCH(config)#bandwidth-limit ingress 1 ports 1-8
10.3.3.4
Storm Control
Table 125: CLI "Storm Control" Configuration
Node
enable
configure
configure
Example
L2SWITCH#configure terminal
L2SWITCH(config)#storm-control rate 1 type broadcast ports 1-6
L2SWITCH(config)#storm-control rate 1 type multicast ports 1-6
L2SWITCH(config)#storm-control rate 1 type DLF ports 1-6
Manual
1.1.0
Command
show storm-control
storm-control rate
RATE_LIMIT type (bcast
| mcast | DLF |
bcast+mcast | bcast+DLF |
mcast+DLF |
bcast+mcast+DLF) ports
PORTLISTS
no storm-control type
(bcast | mcast | DLF |
bcast+mcast | bcast+DLF |
mcast+DLF |
bcast+mcast+DLF) ports
PORTLISTS
Description
This command displays the current "Storm Control"
configurations.
This command enables the bandwidth limit for
broadcast, multicast or DLF packets and sets the
bandwidth limit of a specified type.
This command disables the bandwidth limit for
broadcast, multicast or DLF packets.
Appendix
267