Table 95: Wbm "Access Control List" Page - WAGO 852-1305 Manual

8/4-port 100base-t/1000base-sx/lx industrial-managed-switch, 8 ports 100base-t,4 slots 1000base-sx/lx
Table of Contents

Advertisement

WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX

Table 95: WBM "Access Control List" Page

Access Control List Settings
Parameters
Profile Name
Action
ETHERNET Type
VLAN
Source MAC
Mask of Source MAC
Destination MAC
Mask of De4stination
MAC
DSCP
Manual
1.1.0
Configuring in the Web-Based Management System (WBM)
Default
Description
Enter the name of the profile in the input field.
Disable
Select "Disable" in the selection box to disable
access control.
Permit
Select "Permission" in the selection box to forward
data packet that match the information.
Drop
Select "Drop" in the selection box to drop data
packet that match the information.
DSCP
Select "DSCP" to give data packet a new priority
that match the information.
Any
Select "any" in the selection box, so every
ETHERNET type is valid.
Other
Select "Other" in the selection box to specify an
ETHERNET type for which access control is valid.
Any
Select "any" in the selection box, so every VLAN ID
is valid.
Other
Select "Other" in the selection box to enter a specific
VLAN ID in the access control list.
Any
Select "any" in the selection box, so every MAC
address is valid.
Other
Select "Other" in the selection box to enter the MAC
address for the source in the access control list.
In the input field, enter the source MAC ID of the
bitmap mask for source MAC addresses of packets
to be filtered.
If you selected "any" in the "Source MAC Address"
selection box, the field remains empty. The profile
then only filters the MAC address entered in the
source MAC address field.
Any
Select "any" in the selection box, so every MAC
address is valid.
Other
Select "Other" in the selection box to enter the
destination MAC address in the access control list.
In the input field, enter the destination MAC address
of the bitmap mask for designation MAC addresses
of packets to be filtered.
If you selected "Destination MAC Address" in the
selection box, the field remains empty. The profile
then only filters the MAC address entered in the
designation MAC address field.
Any
Select "any" in the selection box, so every DSCP
priority for the access control list is valid.
0 ... 63
Other
Select the DSCP priority in the selection
box.
219

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents