Port Settings; Figure 26: Wbm "Configuration" Page - "Port Settings" Tab; Table 20: Wbm "Configuration" Page - "Port Settings" Tab - WAGO 852-1322 Manual

852-1322/852-1328 Industrial Managed Switch
7.4.3

Port Settings

The user can control the state of each port by either selecting Enable or Disable
from the dropdown list as shown in Figure "WBM "Configuration" Page – "Port
Settings" Tab". After finishing any change on the port setting, please click on the
[Submit] button.
Figure 26: WBM "Configuration" Page – "Port Settings" Tab
The description of each parameter and its default value in Port Settings tab page
are summarized in Table "WBM "Configuration" Page – "Port Settings" Tab".
Table 20: WBM "Configuration" Page – "Port Settings" Tab
Parameters
Port n
Factory Default Description
Enable Port number on the industrial managed switch. The user can
click on the dropdown list to select either Enable or Disable to
change the status of the port. When enabling a port, data will
be allowed to transmit and receive through that particular port.
Configuration in the WBM 45
Manual
1.0.01