WAGO 852-1305 Manual page 125

WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Table 33: WBM Page, "General" – "SNTP" Tab
Daylight Saving Settings
Parameters
State
1)
Start Date
2)
End Date
1)
Daylight savings starts on the second Sunday of March in most places in the USA.
Daylight savings starts at 2 A.M local time in each time zone in the USA.
Correspondingly, you would select "Second, Sunday, March" and "2:00".
In the EU, daylight savings starts on the last Sunday in March.
It starts at the same time (1:00 A.M GMT or UTC) in all EU time zones. Correspondingly, you
would select "Last, Sunday, March") and in the last field, enter the time based on your time
zone. In Germany, for instance, you would select "2:00" because Germany's time zone is one
hour ahead of GMT or UTC (GMT+1).
2)
In the USA, daylight savings ends on the last Sunday in October.
It ends at 2:00 A.M. local time in each time zone in the USA.
Correspondingly, you would select "First, Sunday, November" and "2:00".
In the EU, daylight savings ends on the last Sunday in October.
Daylight savings ends at the same time (1:00 AM GMT or UTC) in all EU times zones.
Correspondingly, you would select "Last, Sunday, October") and in the last field, enter the time
based on your time zone. In Germany, for instance, you would select "2:00" because Germany's
time zone is one hour ahead of GMT or UTC (GMT+1).
Manual
1.1.0
Configuring in the Web-Based Management System (WBM)
Default Description
Disable Select "Disable" if you do not want to use daylight
savings time.
Enable Select "Enable" if you want to use daylight savings
time.
Enter the date and time for the start of daylight
savings if you have enabled this option. The time is
displayed in 24-hour format.
Enter the date and time for the end of daylight
savings if you have enabled this option. The time is
displayed in 24-hour format.
125