Table 142: Cli "Server Screening" Configuration; Table 143: Cli "Binding Table" Configuration; Server Screening - WAGO 852-1305 Manual

282 Appendix
10.3.4.2

Server Screening

Table 142: CLI "Server Screening" Configuration

Node
enable
configure
configure
10.3.4.3 Binding Table

Table 143: CLI "Binding Table" Configuration

Node
enable
configure
configure
Example
L2SWITCH#configure terminal
L2SWITCH(config)#dhcp-snooping binding mac 00:11:22:33:44:55 ip 1.1.1.1
vlan 1 port 2
L2SWITCH(config)#no dhcp-snooping binding mac 00:11:22:33:44:55
L2SWITCH#show dhcp-snooping binding
Command
show dhcp-snooping
server
dhcp-snooping server
IPADDR
no dhcp-snooping server
IPADDR
Command
show dhcp-snooping
binding
dhcp-snooping binding
mac MAC_ADDR ip
IP_ADDR vlan VLANID
port PORT_NO
no dhcp-snooping binding
mac MACADDR
WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Description
This command displays the IP address of the valid
DHCP server.
This command configures the IP address of a valid
DHCP server.
This command deletes the IP address of a valid
DHCP server.
Description
This command displays the current "DHCP
Snooping" binding table.
This command configures a static host into the
"DHCP Snooping" binding table.
This command deletes a static host from the "DHCP
Snooping" binding table.
Manual
1.1.0