WAGO 852-1305 Manual page 104

104 Enhanced Features
Local User Accounts
By storing user profiles locally on the switch, it can authenticate users without
interacting with the network authentication server. However, there is a limit on the
number of users that can be authenticated in this way.
Guest VLAN
The Guest VLAN function in IEEE 802.1x port-based authentication on the
switch provides limited services to clients, such as downloading the IEEE 802.1x
client. These clients can update their system for IEEE 802.1x authentication.
If you enable a guest VLAN on an IEEE 802.1x port, the switch assigns clients to
a guest VLAN when the switch does not receive a response to its EAP
request/identity frame or when EAPOL packets are not sent by the client.
Port Parameters
• Admin Control Direction
Both
Incoming
• Re-Authentication
This function specifies if a subscriber must periodically re-enter his or her
user name and password to stay connected to the port.
• Reauth-Period
The "Reauth-Period" function is used to specify how often a client has to re-
enter his or her username and password to stay connected to the port. The
acceptable range for this field is 0 to 65535 seconds.
Port Control Mode
•
"Auto"
"Force-authorized"
"force-unauthorized"
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
- If 802.1x port authentication for a user has failed,
incoming and outgoing packets on the port are
dropped.
- If 802.1x port authentication for a user has failed, only
incoming packets on the port are dropped.
Users can access the network after authenticating.
Users can access the network without
authentication.
Users cannot access the network.
WAGO-ETHERNET-Zubehör 852
Manual
1.1.0