Management; Snmp; 9.6.1.1.1 Snmp Settings; Figure 102: Wbm Page, "Snmp" - "Snmp Settings" Tab - WAGO 852-1305 Manual

242 Configuring in the Web-Based Management System (WBM)
9.6

Management

9.6.1

SNMP

9.6.1.1

SNMP

9.6.1.1.1 SNMP Settings

Additional Information
Please refer to the section "Function Description" for more information on
"SNMP" (Simple Network Management Protocol).
Figure 102: WBM Page, "SNMP" – "SNMP Settings" Tab
Table 106: WBM Page, "SNMP" – "SNMP Settings" Tab
SNMP Setting
Parameters
SNMP State
System Name
System Location
System Contact
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Default Description
Select "Disable" in the selection box to disable
Disable
SNMP on the switch.
Enable Select "Enable" in the selection box to enable SNMP
on the switch.
L2SWITCH Enter the system name for the switch in the input
field.
(System name and host name are identical.)
192.168.0.254 Enter the IP address (location information) of the
switch in decimal-point notation.
255.255.255.0 Enter the IP subnet mask of the switch in decimal-
point notation.
WAGO-ETHERNET-Zubehör 852
Manual
1.1.0