Monitor; Alarm Information; Monitor Information; Rmon Statistics - WAGO 852-1305 Manual

106 Enhanced Features
7.4

Monitor

7.4.1

Alarm Information

This function alerts the network administrator to any abnormal network situations.
Alarm DIP Switches
The alarm DIP switches allow users to configure if an alarm message should be
sent when a corresponding event occurs.
Example
P1:
PWR:
RPS:
7.4.2

Monitor Information

This function displays some hardware information to monitor the system and to
guarantee proper network operation.
7.4.3

RMON Statistics

This function is used to monitor or delete RMON statistics.
Jabber
Subscribers whose data packets are longer than the allowable MTU ("Maximum
Transmission Unit") on a network (e.g., ETHERNET) are referred to as Jabbers.
7.4.4

SFP

SFP ("Small Form-factor Pluggable") are small standardized modules for network
connections.
SFP refers to a modular interface to support various transmission media and is
used in network technology for interface flexibility.
ON (AN) – The switch sends an alarm message if the connection
on Port 1 fails.
ON – The switch sends an alarm message if the primary
power supply is interrupted.
ON – The switch sends an alarm message if the redundant
power supply is interrupted.
WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Manual
1.1.0