WAGO 852-1305 Manual page 21

WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Pos : 16.8 /Serie 852 (ETH ERNET-Zubehör)/Gerätebes chr eibung/Einl eitung/Eigenschaften 852- 1305 @ 27\mod_1467270906712_21.doc x @ 215495 @ @ 1
Other key features are:
• Eight (8) 10/100/1000BASE-T, four (4) 1000BASE-SX/LX (SFP type fiber
transceivers) and one (1) Console port (RJ-45)
• Diagnostic LEDs on the front
• Web-based/SNMP Management
• Redundant DC power supply
• Large voltage range: 12 ... 60 V
• DIP switches to set alarm functions
• Full compliance with IEEE 802.3, 802.3u, 802.3z, 802.3x, 802.3ad,
802.3ab, 802.1d, 802.1q, 802.1p, 802.1w, 802.1x standards
• Implemented functions:
- Dual ring
- ERPS
- Jet ring
- Xpress Ring (redundant ring) with less than 50 ms recovery time
• Non-blocking, store-and-forward switching, rapid spanning tree protocol
(RSTP)
• Auto-negotiation on all 10/100/1000Base-T ports
• Auto-MDI/MDIX (crossover) on all 10/100/1000BASE-T ports
• VLAN (802.1q) VID
• IGMP snooping for multicast filtering
• Port configuration status and statistics
• Port trunking
• SNMP v1/v2 and RMON
• Rugged IP30 metal housing
• Operable in vibration / shock
Pos : 17 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
1.1.0
General 21