Table 130: Cli "Vlan Settings" Configuration; Vlan Settings - WAGO 852-1305 Manual

WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX

10.3.3.8.2 VLAN Settings

Table 130: CLI "VLAN Settings" Configuration

Node
enable
configure
configure
vlan
vlan
vlan
vlan
vlan
vlan
vlan
vlan
vlan
vlan
Example
L2SWITCH#configure terminal
L2SWITCH(config)#vlan 2
L2SWITCH(config-vlan)#fixed 1-6
L2SWITCH(config-vlan)#untagged 1-3
Manual
1.1.0
Command
show vlan VLANID
vlan <1~4094>
no vlan <1~4094>
show
name STRING
no name
fixed PORT_LIST
no fixed
tagged PORT_LIST
no tagged
untagged PORT_LIST
no untagged
acceptable frame type (all
| tagged | untagged)
Description
This command displays the VLAN configurations.
This command enables a VLAN and enters the
VLAN node.
This command deletes a VLAN.
This command displays the current VLAN
configurations.
This command assigns a name for the specific
VLAN.
The VLAN name should be a combination of
numbers, letters, hyphens (-) or underscores (_).
The maximum length of the name is 16 characters.
This command resets the VLAN name to the default
setting.
Note: The default VLAN name is comprised
as follows: "VLAN"+VLAN_ID,
VLAN1, VLAN2, ...
This command assigns ports to a VLAN group as
fixed subscribers.
This command deletes all fixed ports from a VLAN.
This command assigns fixed ports to a VLAN group
as tagged subscribers. The port(s) should be a fixed
subscriber of the VLAN group.
This command deletes all tagged member from a
VLAN.
This command assigns fixed ports to a VLAN group
as untagged subscribers. The port(s) should be a
fixed subscriber of the VLAN group.
This command deletes all untagged ports from a
VLAN.
This command configures the acceptable frame type.
Appendix 271