Snmp Trap; Auto Provision - WAGO 852-1305 Manual

WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
7.5.2

SNMP Trap

A trap is an unsolicited message from an agent to the manager that an event has
occurred. The SNMP Manager that receives the tap can ask for more information.
7.5.3

Auto Provision

The "Auto Provision" is a service that service providers can use to quickly, easily
and automatically configure remote devices or update firmware from a remote
location.
1. If the function is enabled, the switch first downloads an information file
from the server of the service provider.
The file name is formed according to the following naming convention:
Model_Name_Autoprovision.txt
Example: MEN-5210_Autoprovision.txt
The contents of the file are:
AUTO_PROVISION_VER=1
Firmware_Upgrade_State=1
Firmware_Version=5228-000-1.0.0.b1
Firmware_Image_File=5228-000-1.0.0.b1.fw
Firmware_Reboot=1
Global_Configuration_State=0
Global_Configuration_File=5228-000-1.0.0.b1.save
Global_Configuration_Reboot=0
Specific_Configuration_State=0
Specific_Configuration_Reboot=0
2. If the "AUTO_PROVISION_VER" value is higher than the current version
of the "Auto Provision", continue to Step 3. If not, please wait 24 hours and
start again with Step 1.
3. If "Firmware_Upgrade_State =1", continue to Step 4. If not, continue to
Step 6.
4. If the "Firmware_Version" differs from the current firmware version, please
download the "Firmware_Image_File" and update the firmware.
5. If the firmware is updated successfully and "Firmware_Reboot=1",
"reboot_flag=1" is executed.
6. If "Global_Configuration_State =1", please download the
"Global_Configuration_File" and update the configuration. If not, continue
to Step 8.
7. If the configuration is updated successfully and
"Global_Configuration_Reboot =1", "reboot_flag=1" is executed.
Manual
1.1.0
Enhanced Features 109