Figure 64: Wbm "Q-In-Q" Page - "Port-Based Q-In-Q" Tab; Table 68: Wbm "Q-In-Q" Page - "Port-Based Q-In-Q" Tab; Port-Based Q-In-Q - WAGO 852-1305 Manual

WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX

9.3.3.6.2 Port-based Q-in-Q

Figure 64: WBM "Q-in-Q" Page – "Port-based Q-in-Q" Tab
Table 68: WBM "Q-in-Q" Page – "Port-based Q-in-Q" Tab
Port-based Q-in-Q
Parameters
Port
Role
SPVID (1~4094)
Priority
Port-based Q-in-Q Status
Parameters
Port
Role
SPVID
Priority
Manual
1.1.0
Configuring in the Web-Based Management System (WBM)
Default
From: 1
To: 1
Normal
Access
Tunnel
1
0
Default
1 ... 10
1 ... 10
Description
Select a port or port range in the selection box to
configure the "Q-in-Q".
Select a port or port range in the selection box to
configure the "Q-in-Q".
Select "Normal" in the selection box to select this
role for the specific port.
Select "Access" in the selection box to select this
role for the specific port.
Select "Tunnel" in the selection box to select this
role for the specific port.
Enter the service provider VLAN "SPVID" in the
input field.
Select the respective priority for the specific port in
the selection box.
0 = Lowest priority
7 = Highest priority
Description
This column displays the port number.
This column displays the role of the specific port.
This column displays the SPVID.
This column displays the priority for the specific
port.
173