Table of Contents
Advertisement
16
List of Figures
the appropriate port by using this assignment table based on their destination
address. The incoming data package is sent to all ports, if there is no
corresponding entry in the assignment table for a destination address. If a
destination address answers, the assignment table is complemented with this
destination address as well as the associated port.
3.6
Port Speed & Duplex Mode
After a cable is plugged into a specific port, the system uses auto negotiation to
determine the transmission mode for the new twisted pair connection:
If the connected device does not support auto negotiation or has auto negotiation
disabled, an auto sensing process is initiated to select the speed and set the
duplex mode to half duplex.
Manual
Version 1.2.0, valid from FW/HW Version 01/06
WAGO ETHERNET Accessories 852
852-0111 5 Port 100BASE-TX Industrial ECO Switch
Advertisement
Chapters
Table of Contents
