Switching Technology - WAGO 852-1305 Manual

20 General
Pos : 16.5 /Serie 852 (ETH ERNET-Zubehör)/Einl eitung/Switc hing-T echnologie @ 3\mod_1222683606296_21.doc x @ 22317 @ 2 @ 1
3.3

Switching Technology

Another approach to pushing beyond the limits of ETHERNET technology is the
development of switching technology. A switch bridge ETHERNET packets at
the MAC address level of the ETHERNET protocol transmitting among
connected ETHERNET or Fast ETHERNET LAN segments.
Switching is a cost-effective way of increasing the total network capacity
available to users on a local area network. A switch increases capacity and
decreases network loading by dividing a local area network into different
segments, which don´t compete with each other for network transmission
capacity.
Pos : 16.6 /Serie 852 (ETH ERNET-Zubehör)/Gerätebes chr eibung/Einl eitung/Eigenschaften 852- x30x allgemei n @ 24\mod_1452170503897_21.doc x @ 197826 @ @ 1
The Industrial Managed Switch was developed for easy installation in a
manufacturing environment where vibration, shock, heat and radio frequency
interference are common.
Due to its small, compact size, the Industrial Managed Switch makes mounting on
the DIN rail particularly simple and installation possible in environments with
limited space.
Two or more switches can be added in series to the Industrial Managed Switch.
Since all ports support 100 Mbit/, this series connection is possible for the
industrial managed switch from every port and with any number of switches.
The Industrial Managed Switch is also equipped with a variety of management
functions that let you configure communication parameters as you desire to
monitor network behavior in different ways. In addition, the Industrial Managed
Switch is built with dual redundant power inputs for maximum reliability and
network availability. Other integrated features of the switch such as Auto-
negotiation, Rate limitation, Port isolation, etc. optimize your network
performance and provide a secure network, offering a cost-effective solution in a
small but powerful package.
The 1000BASE SX/LX ports are designed to connect Gigabit SFP modules that
support network speeds of 100/1000 Mbit/s.
Pos : 16.7 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Manual
1.1.0