Figure 44: Wbm "Rate Limitation" Page - "Bandwidth Limitation" Tab; Table 48: Wbm "Rate Limitation" Page - "Bandwidth Limitation" Tab; Bandwidth Limitation - WAGO 852-1305 Manual

144 Configuring in the Web-Based Management System (WBM)

9.3.1.2.2 Bandwidth Limitation

Additional Information
Please refer to the section "Function Description" for more information on
"Bandwidth Limitation".
Figure 44: WBM "Rate Limitation" Page – "Bandwidth Limitation" Tab
Table 48: WBM "Rate Limitation" Page – "Bandwidth Limitation" Tab
Bandwidth Limitation Settings
Parameters
Port
Ingress (Mbs)
Egress (Mbs)
Bandwidth Limitation Status
Parameters
Port
Ingress (Mbs)
Egress (Mbs)
Default
From: 1
to: 1
0
0
Default
1 ... 10
WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Description
Select a port or port range in the selection box to
configure the "Rate Limitation Settings".
Select a port or port range in the selection box to
configure the "Rate Limitation Settings".
Enter the "Rate Limitation" for incoming packets in
the input field.
Port 1 ... 8 0 ... 100
Port 9 ... 10 0 ... 1000
Enter the "Rate Limitation" for outgoing packets in
the input field.
Description
This column displays the port numbers.
This column displays the bandwidth set for
"Ingress".
This column displays the bandwidth set for
"Egress".
Manual
1.1.0