WAGO 852-1305 Manual page 121

WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Table 31: WBM Page, "General Settings" – "System" Tab
IPv6 Settings
Parameters
DHCP Client
IP Address
Subnet Mask
Default Gateway
IPv6 Settings
Parameters
DHCPv6 Client
Static IPv6 Address
Default Gateway
Manual
1.1.0
Configuring in the Web-Based Management System (WBM)
Default Description
Disable Select "Disable" in the selection box if you want to
manually configure the IP address of the switch.
Click
address from the DHCP server.
Enable Select "Enable" in the selection box to allow the
switch to get its IP address from a DHCP server
automatically.
Click
address from the DHCP server.
Enter the IP address of the switch in decimal-point
192.168.0.254
notation.
Enter the IP subnet mask of the switch in decimal-
255.255.255.0
point notation.
0.0.0.0 Enter the IP address of the default outgoing gateway
in decimal-point notation.
Default Description
Disable Select "Disable" in the selection box if you want to
manually configure the IP address of the switch.
Enable Select "Enable" in the selection box to allow the
switch to get its IP address by DHCP automatically.
Click [Renew
This field displays the static IPv6 address.
Enter the IP address of the default outgoing gateway
in decimal-point notation.
[Renew]
to allow the switch to get an IP
[Renew]
to allow the switch to get an IP
]
for the switch to update the values.
121