Table 141: Cli "Dhcp Snooping" Configuration; Security - WAGO 852-1305 Manual

WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
10.3.4

Security

10.3.4.1 DHCP Snooping

Table 141: CLI "DHCP Snooping" Configuration

Node
enable
configure
configure
configure
configure
configure
configure
interface
interface
interface
interface
Example
L2SWITCH#configure terminal
L2SWITCH(config)#dhcp-snooping enable
L2SWITCH(config)#dhcp-snooping vlan 1
L2SWITCH(config)#interface 1/0/1
L2SWITCH(config-if)#dhcp-snooping trust
L2SWITCH(config)#dhcp option82 enable
L2SWITCH(config)#dhcp option82 information Test01
Manual
1.1.0
Command
show dhcp-snooping
dhcp-snooping (disable |
enable)
dhcp-snooping vlan
VLANID
no dhcp-snooping vlan
VLANID
dhcp option82 (disable |
enable)
dhcp option82 information
STRING
no dhcp option82
information
dhcp-snooping host
no dhcp-snooping host
dhcp-snooping trust
no dhcp-snooping trust
Description
This command displays the current "DHCP
Snooping" configurations.
This command disables / enables the "DHCP
Snooping" on the switch.
This command enables the "DHCP Snooping"
function on a VLAN or VLAN range.
This command disables the "DHCP Snooping"
function on a VLAN or VLAN range.
This command disables / enables the "DHCP Relay
Option 82" function.
This command configures the information for the
"DHCP Relay Option 82" function.
This command deletes the information for the
"DHCP Relay Option 82" function.
This command configures the maximum host count
for the specific port.
This command configures the maximum host count
for the specific port to the default value.
This command configures the "Trusted Port" for the
specific port.
This command configures the "Untrusted Port" for
the specific port.
Appendix 281