Multicast Address; Figure 53: Wbm "Multicast Address" Page; Table 57: Wbm "Multicast Address" Page - WAGO 852-1305 Manual

156 Configuring in the Web-Based Management System (WBM)
9.3.2.4

Multicast Address

Additional Information
Please refer to the section "Function Description" for more information on
"Multicast Address".

Figure 53: WBM "Multicast Address" Page

Table 57: WBM "Multicast Address" Page

Static Multicast Address Settings
Parameters
VLAN ID
MAC Address
Port
Multicast Address Table
Parameters
VLAN ID
MAC Address
Status
Port
Action
Total count
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Default Description
1 Select the VLAN ID in the selection box that you
want to configure.
Enter the multicast MAC address of the respective
ring in the input field.
Configure a multicast MAC that does not receive an
"Age Time."
The valid format is: 0x:0x:0x:0x:0x:0x.
Enter the subscriber port for the multicast address in
the input field.
Default Description
0 ... 4094 This column displays the selected VLAN IDs.
This column displays the multicast addresses.
This column displays the status of the multicast
addresses.
1 - 10 This column displays the port numbers.
Click [Delete] to delete the multicast addresses.
This field displays the total number of entries in the
multicast address table.
WAGO-ETHERNET-Zubehör 852
Manual
1.1.0