Table 39: Wbm "Port Mirroring" Page - WAGO 852-1305 Manual

WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX

Table 39: WBM "Port Mirroring" Page

Port Mirroring Settings
Parameters
State
Monitor to Port
All Ports
Source Port
Mirror Mode
Manual
1.1.0
Configuring in the Web-Based Management System (WBM)
Default Description
Disable Select "Disable" to disable the "Port Mirroring".
Enable Select "Enable" to enable the "Port Mirroring".
1 Select a port to be connected to a "Network Traffic
Analyzer".
- Settings in this select box apply to all ports.
Make settings here to be applied to all ports.
Disable
Start here with general settings and then change the
Ingress
settings for individual ports.
Egress
Both
1 ... 10 This column displays the number of individual
source ports.
Disable Select "Disable" to prevent traffic being copied from
the specified source port to the monitor port.
Ingress Select "Ingress" to only copy the input data
(incoming) from the specified source ports to the
monitor port.
Egress Select "Egress" to only copy the output data
(outgoing) from the specified source ports to the
monitor port.
Both Select "Both" to copy both incoming and outgoing
data from the specified source ports to the monitor
port.
133