WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
10.3.6.5
System Log
Table 158: CLI "System Log" Configuration
Node
enable
enable
enable
configure
configure
Example
L2SWITCH#configure terminal
L2SWITCH(config)#syslog-server ip 192.168.200.106
L2SWITCH(config)#syslog-server enable
10.3.6.6
User Account
Table 159: CLI "System Log" Configuration
Node
enable
configure
configure
Example
L2SWITCH#configure terminal
L2SWITCH(config)#add user q q admin
L2SWITCH(config)#add user 1 1 normal
Pos : 30.7 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
1.1.0
Command
show syslog
show syslog level LEVEL This command displays the log messages with the
show syslog server
syslog (disable | enable)
syslog ip IPADDR
Command
show user account
add user
USER_ACCOUNT
PASSWORD (normal |
admin)
delete user
USER_ACCOUNT
Description
The command displays all log messages recorded in
the switch.
"LEVEL" recorded in the switch.
The command displays the syslog server
configurations.
The command disables / enables the System Log
function.
The command configures the IP address of the
syslog server.
Description
This command displays the current user accounts.
This command adds a new user account.
The command deletes an existing user account.
Appendix
293