User Account; Figure 112: Wbm "User Account" Page - WAGO 852-1305 Manual

256 Configuring in the Web-Based Management System (WBM)
9.6.6

User Account

The switch allows users to create up to six user accounts. The user name and
password must be a combination of numbers or letters. The last admin account
cannot be deleted. To use the CLI or Web-Based Management, a user has to be
logged into a valid user account.
User Permissions
The switch supports two types of user accounts:
The default user accounts have the following credentials:
Firmware version 01:
Firmware version 02:
1. Admin account
2. Normal user account
The switch also supports a "Backdoor" user account. If a user has forgotten his
user name or password, the switch can create a "backdoor" account with the MAC
address of the system. A user can then log into the switch and create a new
account.

Figure 112: WBM "User Account" Page

852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
User Name = „admin"
User Password = „Wago1951"
User Name = „admin"
User Password = „wago"
Read/Write permissions
Read permission only
- Cannot enter privileged mode in the CLI.
- Configurations cannot be changed in the
Web-Based Management.
WAGO-ETHERNET-Zubehör 852
Manual
1.1.0