Table 76: Wbm "Link Aggregation" Page - "Static Trunk" Tab - WAGO 852-1305 Manual

WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Table 76: WBM "Link Aggregation" Page – "Static Trunk" Tab
Static Trunk Settings
Parameters
Group State
Load Balance
Member
Ports
Trunk Group Status
Parameters
Group ID
State
Load Balance
Member Ports
Manual
1.1.0
Configuring in the Web-Based Management System (WBM)
Default
Group 1 ...
Group 6
Disable
Enable
MAC
IP
Select All
Deselect All
 1 ...
 10
Default
1 ... 6
Disable
Enable
1 ... 6
Description
Select a group ID for the "Trunk Group" (a logical
ling containing multiple ports) in the selection box.
Select "Disable" in the selection box to disable a
static "Trunk Group".
Select "Enable" in the selection box to use a static
"Trunk Group".
Select "MAC" in the selection box to configure the
algorithm for load balancing of a specific "Trunk
Group".
Select "IP" in the selection box to configure the
algorithm for load balancing of a specific "Trunk
Group".
No port is selected to be added to the static
 
"Trunk Port".
All ports are selected to be added to the status

"Trunk Group".
No port is disabled.
 
All ports are disabled.

The port is not enabled.
 
The port is enabled.

Description
This column displays the group ID for a "Trunk
Group" (a logical link containing multiple ports).
This column displays if a "Trunk Group" is enabled
or disabled.
This column displays the policy for load balancing
of the "Trunk Group".
This column displays the ports assigned to the
"Trunk Group".
187