Table 33: Wbm Page, "General" - "Sntp" Tab - WAGO 852-1305 Manual

124 Configuring in the Web-Based Management System (WBM)
Table 33: WBM Page, "General" – "SNTP" Tab
Current Time and Date
Parameters
Current Time
Current Date
Time and Date Settings
Parameters
Manual
Enable Network Time
Protocol
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Default Description
This field displays the current time if you open or
refresh the menu.
The field displays the current date if you open or
refresh the menu.
Default Description
New Time  Select this option if you want to manually set the
time and date for the system.
Enter the new date in the format year/month/day
format and time in the format hour/minute/second.
Click [Apply] to display the "Current Time" and
"Current Date".
Select this option to use NTP ("Network Time
Protocol") for the time service.
NTP Server   Select this option if you want to use a predefined
time server.
The switch searches for a time server for 60
seconds.
 Select this option if you enter the IP address of a
time server.
The switch searches for a time server for 60
seconds.
0.0.0.0
 IP
 Domain
Name
Time Zone Enter the time difference between UTC ("Universal
Time Coordinated", formally GMT "Greenwich
+0000 Mean Time") and the time zone in hh.mm.
WAGO-ETHERNET-Zubehör 852
Enter the IP address of the NTP
server in decimal-point notation.
Enter the domain address of the
switch.
Manual
1.1.0