Table 127: Cli "Mvr" Configuration - WAGO 852-1305 Manual

WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
10.3.3.6 MVR

Table 127: CLI "MVR" Configuration

Node
enable
enable
enable
configure
configure
MVR
MVR
MVR
MVR
MVR
MVR
MVR
MVR
MVR
MVR
MVR
MVR
MVR
Manual
1.1.0
Command
show mvr
show mvr vlan VLANID
show igmp-snooping
mvr VLANID
no mvr VLANID
group NAME
no group NAME
inactive
no inactive
mode (dynamic |
compatible)
name STRING
no name
receiver-port PORTLIST
no receiver-port
PORTLIST
source-port PORTLIST
no source-port PORTLIST This command deletes a port or port range from the
tagged PORTLIST
no tagged PORTLIST
Description
This command displays the current MVR
configurations.
This command displays the current MVR
configurations of the specific VLAN.
This command displays the current "IGMP
Snooping" configurations.
This command creates the MVR configurations for
the specific VLAN.
This command disables the MVR configurations for
the specific VLAN.
This command creates a group configuration for the
MVR.
This command deletes the group configurations from
the MVR.
This command disables the MVR settings.
This command enables the MVR settings.
This command configures the mode for the MVR.
- Dynamic: Sends "IGMP Reports" to
all MVR source ports in the
multicast VLAN.
- Compatibility: The switch does not send any
"IGMP Reports".
This command configures the name for the MVR.
This command configures the default name for the
MVR.
This command assigns a receiver port or receiver
port range. Normally, the source ports are connected
to the "Streaming Client".
This command deletes a port or port range from the
list of receiver ports.
This command assigns a source port or source port
range. Normally, the source ports are connected to
the "Streaming Server".
list of source ports.
This command assigns a tagged port or port range.
The same applies to VLAN tagged ports.
Appendix 269