Table 59: Wbm "Port Isolation" Page - WAGO 852-1305 Manual

WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX

Table 59: WBM "Port Isolation" Page

Port Isolation Settings
Parameters
Port
Egress
Port
Select All
Deselect All


Port Isolation Status
Parameters
Port
Egress Port
Manual
1.1.0
Configuring in the Web-Based Management System (WBM)
Default
From: 1
to: 1


0 (CPU) ... 
10
Default
V
Description
Select a port or port range in the selection box for
which you want to configure the "Port Isolation"
setting.
Select a port or port range in the selection box for
which you want to configure the "Port Isolation"
setting.
An egress port is an outgoing port through which a
data packet is sent.
The selection of a port as an egress port means that it
can communicate with the port being configured.
No egress port is selected.

All egress ports are selected.

No egress port is disabled.

All egress ports are disabled.

The egress port is not enabled.

The egress port is enabled.

Description
V "V" indicates that the port's packets can be sent
to this port.
- "-" indicates the port's packets cannot be sent
to this port.
159