280
Appendix
Table 139: CLI "STP" Configuration
Node
interface
interface
interface
interface
10.3.3.18 Xpress Ring
Table 140: CLI "Xpress Ring" Configuration
Node
enable
config
config
config
config
Command
spanning-tree cost
VALUE
no spanning-tree cost
spanning-tree port-priority
<0-240>
no spanning-tree port-
priority
Command
show xpress-ring
xpress-ring (disable |
enable)
xpress-ring role
(forwarder | arbiter)
xpress-ring ring-port1
xpress-ring ring-port2
WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Description
This command configures the costs for the specific
port.
Cost range:
16-bit-based value range of 1 to 65,535,
32-bit-based value range of 1 to 200,000,000.
This command configures the path cost of the
specific port to the default value.
This command configures the priority for the
specific port.
Default value: 128.
This command configures the priority to of the
specific port to the default value.
Description
This command displays the current status of the
Xpress ring.
This command enables / disables the Xpress ring
function on the switch.
This command configures the role ("Forwarder" or
"Arbiter") on the switch.
This command configures one port of the ring.
This command configures the other port of the ring.
Manual
1.1.0