Table 144: Cli "Arp Inspection" Configuration; Table 145: Cli "Filter Table" Configuration; Arp Inspection - WAGO 852-1305 Manual

WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
10.3.4.4

ARP Inspection

Table 144: CLI "ARP Inspection" Configuration

Node
enable
configure
configure
configure
interface
interface
Example
L2SWITCH#configure terminal
L2SWITCH(config)#arp-inspection enable
L2SWITCH(config)#arp-inspection vlan 1
L2SWITCH(config)#interface 1/0/1
L2SWITCH(config-if)#arp-inspection trust
10.3.4.5 Filter Table

Table 145: CLI "Filter Table" Configuration

Node
enable
configure
configure
Manual
1.1.0
Command
show arp-inspection
arp-inspection (disable |
enable)
arp-inspection vlan
VLANID
no arp-inspection vlan
VLANID
arp-inspection trust
no arp-inspection trust
Command
show arp-inspection mac-
filter
arp-inspection mac-filter
age VALUE
no arp-inspection mac-
filter mac MACADDR
Description
This command displays the current configurations
for the ARP Inspection.
This command disables / enables the ARP Inspection
function on the switch.
This command enables the ARP Inspection function
on a VLAN or VLAN range.
This command disables the ARP Inspection function
on a VLAN or VLAN range.
This command configures the "Trusted Port" for the
specific port.
This command configures the "Untrusted Port" for
the specific port.
Description
This command displays the current MAC address
filter for the ARP Inspection.
This command configures the "Age Time" for the
MAP address filter entries of the ARP Inspection.
This command deletes a MAC address filter entry
from the MAC filter table of the ARP Inspection.
Appendix 283