Table 69: Wbm "Q-In-Q" Page - "Selective Q-In-Q" Tab - WAGO 852-1305 Manual

WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Table 69: WBM "Q-in-Q" Page – "Selective Q-in-Q" Tab
Selective Q-in-Q Setting
Parameters
Name
Access Ports
(ex. 1,3,5-6)
Tunnel Ports
(ex. 1,3,5-6)
CVID
(Range: 1~4094)
SPVID
(Range: 1~4094)
Selective Q-in-Q Setting
Priority
Selective Q-in-Q Status
Parameters
No.
Name
Access Ports
Tunnel Ports
CVID
SPVID
Priority
Action
Disable
Manual
1.1.0
Configuring in the Web-Based Management System (WBM)
Default Description
Enter the name for the selective Q-in-Q profile in the
input field.
Enter the Access port or port range in the input field.
Enter the tunnel port or port range in the input field.
Enter a customer VLAN "CVID" in the input field.
Enter a service provider VLAN "SPVID" in the
input field.
0 ... 7 Select the respective priority level in the selection
box.
0 = Lowest priority
7 = Highest priority
Disable Select "Disable" in the selection box to disable this
function.
Enable Select "Enable" in the selection box to enable this
function.
Default Description
This column displays the index No.
This column displays the name of the selective Q-in-
Q profile.
This column displays the Access port.
This column displays the Tunnel port.
This column displays the customer VLAN "CVID".
This column displays the service provider VLAN
"SPVID".
0 ... 7 This column displays the respective priority level.
0 = Lowest priority
7 = Highest priority
Disable This column displays the selected action.
Enable
Click [Delete] to delete the selective Q-in-Q
settings.
175