Table 133: Cli "Dhcp Relay" Configuration; Dhcp Relay - WAGO 852-1305 Manual

274 Appendix

10.3.3.11 DHCP Relay

Table 133: CLI "DHCP Relay" Configuration

Node
enable
configure
configure
configure
configure
configure
configure
configure
configure
Example
L2SWITCH#configure terminal
L2SWITCH(config)# interface eth0
L2SWITCH(config-if)# ip address 172.20.1.101/24
L2SWITCH(config-if)# ip address default-gateway 172.20.1.1
L2SWITCH(config)#dhcp relay enable
L2SWITCH(config)# dhcp relay vlan 1
L2SWITCH(config)# dhcp helper-address 172.20.1.1
L2SWITCH(config)#dhcp option82 enable
L2SWITCH(config)#dhcp option82 information Justin
Command
show dhcp relay
dhcp relay (disable |
enable)
dhcp relay vlan
VLAN_RANGE
no dhcp relay vlan
VLAN_RANGE
dhcp helper-address
IP_ADDRESS
no dhcp helper-address
dhcp option82 (disable |
enable)
dhcp option82 information
STRING
no dhcp option82
information
WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Description
This command displays the current configurations
for the "DHCP Relay".
This command disables / enables the "DHCP Relay"
on the switch.
This command enables the "DHCP Relay" function
for a VLAN or a VLAN range.
This command disables the "DHCP Relay" function
for a VLAN or a VLAN range.
This command configures IP address of the DHCP
server.
This command deletes the IP address of the DHCP
server.
This command disables / enables the "DHCP Relay
Option 82" function on the switch.
This command configures the information for the
"DHCP Relay Option 82" function.
This command deletes the information for the
"DHCP Relay Option 82" function.
Manual
1.1.0