WAGO 852-1305 Manual page 226

226 Configuring in the Web-Based Management System (WBM)
Table 97: WBM "802.1x" Page – "Port Settings" Tab
Port Settings
Parameters
Port
802.1x State
Admin Control
Direction
Reauthentication
Port Control Mode
Guest VLAN
Max-req Times
Reauth-period
Quiet-period
Supp-timeout
Server-timeout
Default
From: 1
To: 1
Disable
Enable
Both
In
Disable
Enable
Auto
Force
Authorized
Force
Unauthorized
Ausschalten
Einschalten
2
3600
60
30
30
WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Description
Select a port or port range in the selection box to
configure the "Port Settings".
Select a port or port range in the selection box to
configure the "Port Settings".
Select "Disable" in the selection box to disable this
function.
Select "Enable" in the selection box to enable 802.1x
authentication for the port.
You must first enable 802.1x authentication on the
switch before you can configure this function for
individual ports.
Select "Both" in the selection box if both incoming
and outgoing packets should be dropped if 802.1x
port authentication of a user fails.
Select "Input" in the selection box if only incoming
packets should be dropped if 802.1x port
authentication of a user fails.
Select "Disable" in the selection box if a subscriber
does not regularly enter the user name and password
to remain connected to the port.
Select "Enable" in the selection box if a subscriber
regularly enters the user name and password to
remain connected to the port.
Select "Auto" in the selection box to enable
authentication for the port.
Select "Force Authorized," in the selection box to
enable permanent authentication for the port.
Select "Force Unauthorized, in the selection box to
enable permanent denial of authentication for the
port. No packets can pass through this port.
Select "Disable" in the selection box to disable the
guest VLAN on the port.
Select "Enable" in the selection box to enable the
guest VLAN on the port.
Enter a value for the maximum required time in the
input field that the switch should attempt to connect
to the authentication server before it sees the server
as not connected.
Enter a value for the time in the input field during
which a subscriber has to enter the user name and
password to remain connected to the port.
Enter a value for the time in the input field that the
client must wait before it can request authentication
again.
This prevents the switch from becoming overloaded
with continuous authentication attempts from the
client.
Enter a value for the time in the input field that the
switch must wait before it can communicate with the
server.
Enter a value for the time in the input field that the
switch should wait for a response from the
authentication server.
Manual
1.1.0