Figure 46: Wbm "Security" Page - "802.1X" - "802.1X Port Setting" Tab; Table 36: Wbm "Security" Page - "802.1X" - "802.1X Port Setting" Tab - WAGO 852-1322 Manual

852-1322/852-1328 Industrial Managed Switch
Figure 46: WBM "Security" Page – "802.1X" – "802.1X Port Setting" Tab
The webpage's representation is divided into two parts. The upper part of the
webpage allows the setting of port(s) to be changed, while the lower part of the
webpage is a table displaying the current status of the authorization mode and
the state of each port on the managed switch
any of the port
on the list and choose the Authorization Mode from the dropdown list and click
the [Update] button
can click on the [Refresh] button
Table 36: WBM "Security" Page – "802.1X" – "802.1X Port Setting" Tab
Parameters
Port
Mode
s), click one of the port or press Ctrl key and click multiple ports
)
To check the latest status of the 802
.
.
Factory Default Description
Option Set specific port(s) to be configured.
NO Choices:
FU (Force Unauthorized):
FA (Force Authorized):
AU (Standard Authorization): Specify authorization based
NO:
Configuration in the WBM
To enable the 802 1X security on
. .
1X port setting, user
.
Specify forced unauthorized
Specify forced authorized
on IEEE 802.1X
Specify disable authorization
73
Manual
1.0.01