Table 67: Wbm "Q-In-Q" Page - "Vlan Stacking" Tab - WAGO 852-1305 Manual

172 Configuring in the Web-Based Management System (WBM)
Table 67: WBM "Q-in-Q" Page – "VLAN Stacking" Tab
VLAN Stacking Setting
Parameters
Action
Tunnel TPID Index
TPID
(0000~ffff)
Port
Tunnel TPID Index
VLAN Stacking Status
Parameters
Tunnel TPID Index
TPID
Port
Tunnel TPID Index
(TPID)
Default
Disable
Port-based
Selective
1 (Default) ... 6 Select a table index number in the selection box.
From: 1
To: 1
1 (Default) ... 6 Select a "Tunnel TPID Index" in the selection box.
Default
1 ... 6
0000 ...
ffff
1 ... 10
WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Description
Select "Disable" in the selection box to disable the
VLAN Stacking function.
Select "Port-Based" in the selection box to execute
the VLAN Stacking function port-based.
Select "Selective" in the selection box to execute the
VLAN Stacking function selectively.
Enter a value for the TPID in the input field.
Select a port or port range in the selection box to
configure the "VLAN Stacking".
Select a port or port range in the selection box to
configure the "VLAN Stacking".
Description
This column displays the table index number.
This column displays the TPID.
This column displays the port number.
This column displays the index number for the
specific port.
Manual
1.1.0