Table 64: Wbm "Garp Vlan Registration Protocol" Page - "Gvrp Timer - WAGO 852-1305 Manual

168 Configuring in the Web-Based Management System (WBM)
Table 64: WBM "GARP VLAN Registration Protocol" Page – "GVRP Timer" Tab
GARP Timer Settings
Parameters
Port
Join Time
Leave Time
Leave All Time
GARP Timer Status
Parameters
Port
Join Time
Hold Time
Leave Time
Leave All Time
Default
From: 1
To: 1
20
60
1000
Default
1 ... 10
10
WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Description
Select a port or port range in the selection box to
configure the GARP timer.
Select a port or port range in the selection box to
configure the GARP timer.
Enter the maximum time in milliseconds that the
interface waits before sending VLAN messages.
Enter the maximum time in milliseconds that the
interface waits after receiving a "Leave Message"
before the interface leaves the VLAN specified in
the message.
Enter the time interval in milliseconds after which
the Leave All messages are sent to interfaces. Leave
All messages can help to update information about
current GVRP VLAN subscriber information in the
network.
Description
This column displays the port numbers.
This column displays the Join Time.
This column displays the Hold Time.
This column displays the Leave Time.
This column displays the Leave All Time.
Manual
1.1.0