Table 131: Cli "Garp/Gvrp" Configuration; Garp/Gvrp - WAGO 852-1305 Manual

272 Appendix
10.3.3.9

GARP/GVRP

Table 131: CLI "GARP/GVRP" Configuration

Node
enable
enable
enable
configure
configure
interface
interface
interface
interface
interface
Command
show gvrp configuration
show gvrp statistics
show garp timer
gvrp (disable | enable)
no gvrp configuration
gvrp (disable | enable)
gvrp registration (normal |
forbidden)
no gvrp configuration
garp join-time VALUE
leave-time VALUE
leaveall-time VALUE
no garp time
WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Description
This command displays the GVRP configurations.
This command displays the GVRP configurations for
one port or all ports.
This command displays the timers for GARP.
This command disables / enables GVRP on the
switch.
This command resets the GVRP configuration to the
default setting.
This command disables / enables GVRP on a
specific port.
This command configures the registration mode for
GVRP on a specific port.
This command resets the GVRP configuration for a
specific port to the default setting.
This command configures the "Join Time", "Leave
Time" and "Leaveall Time" for GVRP on a specific
port.
This command resets the Join, Leave and Leaveall
times for GVRP on a specific port to the default
settings.
Manual
1.1.0