WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
9.6.1.1.2 Community Name
Figure 103: WBM Page, "SNMP" – "Community Name" Tab
Table 107: WBM Page, "SNMP" – "Community Name" Tab
Community Name Settings
Parameters
Community String
Rights
Network ID of Trusted
Host
Mask
Manual
1.1.0
Configuring in the Web-Based Management System (WBM)
Default
Description
Enter the "Community String" to act as a password
for requests from the management station.
Read-Only
Select ""Read Only" in the selection box so that the
SNMP manager can use this string to receive
information from the switch.
Read/
Select ""Read/Write" in the selection box so that the
Write
SNMP manager can use this string to configure
settings on the switch.
Enter the IP address of the remote SNMP
management station in decimal-point notation (e.g.,
192.168.1.0).
Enter the IP address of the subnet mask for the
remote SNMP management station in decimal-point
notation (e.g., 255.255.255.0).
243