178
Configuring in the Web-Based Management System (WBM)
9.3.6
Dual Homing
Additional Information
Please refer to the section "Function Description" for more information on "Dual
Homing".
Figure 68: WBM "Dual Homing" Page
Table 72: WBM "Dual Homing" Page
Dual Homing Settings
Parameters
State
Primary Channel
Secondary Channel
Dual Homing Status
Parameters
State
Primary Channel
Secondary Channel
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Default
Description
Disable
Select "Disable" in the selection box to disable this
function.
Enable
Select "Enable" in the selection box to enable "Dual
Homing".
Port
This field configures the primary channel. Select
only one individual port or a "Trunk Group" in the
selection box.
Port
This field configures the secondary channel. Select
only one individual port or a "Trunk Group" in the
selection box.
Default
Description
Disable
This field displays what status "Dual Homing" has.
Enable
None
This field displays the selected primary channel.
Port 1 ... 10
None
This field displays the selected secondary channel.
Port 1 ... 10
WAGO-ETHERNET-Zubehör 852
Manual
1.1.0