WAGO 852-1305 Manual page 183

WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Table 74: WBM "ERPS" Page – "Ring Settings" Tab
Guard Timer (ms)
(10~2000)
Left Port
Right Port
Left Port Enhance Mode
Right Port Enhance Mode Disable
ERPS Ring Status
Parameters
Ring ID
State
Ring Name
Revertive
Instance
Ring Type
Control VLAN
Version
Holdoff Timer (ms)
WTR Timer (min)
MEL
Guard Timer (ms)
Manual
1.1.0
Configuring in the Web-Based Management System (WBM)
500 Enter the value for the "Guard Timer" for the ring in
this input field.
Valid range: 10 ... 2000 ms.
The selection box is used to configure the left port
and its type for the ring.
None Select "None" in the selection box if you do not
want to select any port.
1 ... 10 Select the respective port in the selection box.
Normal Select "Normal" in the selection box if the port is
not assigned any specific function in the ERPS ring.
Neighbour Select "Neighbor" in the selection box if the
neighboring port has the Neighbor function.
Owner Select "Owner" in the selection box if the port
should take the Owner function in the ERPS ring.
The selection box is used to configure the right port
and its type for the ring.
None Select "None" in the selection box if you do not
want to select any port.
1 ... 10 Select the respective port in the selection box.
Normal Select "Normal" in the selection box if the port is
not assigned any specific function in the ERPS ring.
Neighbour Select "Neighbor" in the selection box if the
neighboring port has the Neighbor function.
Owner Select "Owner" in the selection box if the port
should take the Owner function in the ERPS ring.
Disable Select "Disable" in the selection box if a device that
supports ERPS is connected to this port.
Enable Select "Enable" in the selection box if a device that
does not support ERPS is connected to this port.
Please note the Aging Time of the connected device.
Select "Disable" in the selection box if a device that
supports ERPS is connected to this port.
Enable Select "Enable" in the selection box if a device that
does not support ERPS is connected to this port.
Please note the Aging Time of the connected device.
Default Description
1 ... 255 This field displays the Ring ID.
Disable This field displays the ring status.
Enable
This field displays the ring name.
Enable This field displays the status of the revertive mode.
Disable
This field displays the instance for the ring.
Major-ring This field displays the ring type.
Sub-ring
1 ... 4084 This field displays the VLAN of the controller.
v2 This field displays the version of the ERPS function.
v1
0 ... 10000 This field displays the time for the "Hold-off
Timer".
5 ... 12 This field displays the time for the "WTR Timer".
0 ... 7 This field displays the value for the "Control MEL".
10 ...2000 This field displays the time for the "Guard Timer".
183