Table 110: Wbm "Mail Alarm" Page - WAGO 852-1305 Manual

WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX

Table 110: WBM "Mail Alarm" Page

Mail Alarm Settings
Parameters
State
Server IP
Server Port
(Default:25)
Account Name
Account Password
Mail From
Mail To
Trap Select All
State
Deselect All
System Reboot
Port Link Change
Configuration
Change
Firmware
Upgrade
User Login
Port Blocked
Alarm
Manual
1.1.0
Configuring in the Web-Based Management System (WBM)
Default Description
Disable Select "Disable" in the selection box to disable the
"Mail Alarm" function.
Enable Select "Enable" in the selection box to enable the
"Mail Alarm" function.
IP Select "IP" in the selection box if you want to use
the server IP of the mail server.
Domain Select "Domain" in the selection box if you want to
use the domain address of the mail server.
0.0.0.0 Enter the IP address in the input field.
25 Enter the TCP port for SMTP in the input field.
Enter the name of the e-mail account in the input
field.
Enter the password for the e-mail account in the
input field.
Enter the name of the e-mail sender in the input
field.
Enter the name of the e-mail recipient in the input
field.
 No port has been selected for sending event

 All ports are selected for sending event traps.
 No port has been disabled for sending event

 All ports are disabled for sending event traps.
 The port is not enabled.

 The port is enabled.
 The "Port Link Change" state is disabled.

 The "Port Link Change" state is enabled.
 The "Configuration Change" state is disabled.

 The "Configuration Change" state is enabled.
 The "Firmware Upgrade" state is disabled.

 The "Firmware Upgrade" state is enabled.
 The "User Login" state is disabled.

 The "User Login" state is enabled.
 The "Port Blocked" state is disabled.

 The "Port Blocked" state is enabled.
 The "Alert" state is disabled.

 The "Alert" state is enabled.
traps.
traps.
249